The short answer: you are sharing the road
If your broadband is quick at lunchtime but crawls after dinner, you are not imagining it. Somewhere between your home and the internet, capacity is shared with many other customers. When lots of them go online at the same time, there is less to go round and speeds can drop. Openreach, which builds and maintains much of the UK's broadband network, calls this network congestion and says it is common on shared broadband networks.
That is only half the story. Your home network gets busier in the evening as well, so a slow evening can come from the provider's network, your Wi-Fi, or both. thinkbroadband, the independent broadband news and speed test site, says a speed problem is most often caused by several things together.
When is broadband peak time?
There are two answers:
- The official one: 8pm to 10pm. The Advertising Standards Authority (ASA) and Ofcom's broadband speeds code both use this window for home broadband, so advertised speeds and provider estimates are based on it.
- The practical one: early evening to midnight. thinkbroadband says the peak starts around 5pm on weekdays and ramps up until around midnight. In one example on its quality monitor guide, the busy period ran from 4pm to midnight.
So a slowdown at 6pm or 11pm can still be peak-time demand. thinkbroadband also lists weekends among the busy times.
Why the network slows down at busy times
Home broadband is sold on what the industry calls a "best efforts" basis: your provider does its best with capacity that is shared, rather than setting aside a fixed amount just for you. That is why Ofcom lists the time of day and the number of people online at the same time among the factors that can slow a connection, alongside things like line damage and traffic management.
Providers buy capacity for an area and share it
A provider does not reserve a slice of bandwidth for each customer. Instead it buys capacity to serve an area and shares it between the households there. ISPreview gives the example of a single 10Gbps link serving tens of customers or more. Providers model how much people use their connections and buy enough capacity, with some headroom, to cope with the busiest times.
The sharing is described by a contention ratio: how many customers may share the same chunk of capacity, so a lower ratio means fewer households competing for it. One official figure is in the specification for the broadband Universal Service Obligation (USO), the legal right to request a decent connection, which sets a contention ratio no higher than 50:1 alongside a 10Mbps download and 1Mbps upload.
This works because not everyone downloads at full speed at once. It struggles when demand rises together, as it does on weekday evenings.
Where the bottleneck usually is
When the network is the problem, thinkbroadband says a common cause at peak times, such as evenings and weekends, is congestion on the provider's backhaul, the links that carry traffic from local exchanges and aggregation points back into the provider's core network and out to the internet. So a whole area can slow down together with nothing wrong on your own line. It lists two other network causes:
- Traffic management, where a provider controls how different kinds of traffic are handled when its network is busy. Ofcom lists it among the things that can slow a connection.
- Congestion on the wider internet, especially during big events when millions of people want the same thing at once.
On cable broadband, thinkbroadband notes that providers generally over-provision by about 10%, so you should get the speed you were sold as long as your neighbours are not also downloading or uploading a lot at the same time.
Why some providers hold up better than others
ISPreview notes that budget-conscious providers may oversubscribe an area (put too many users on the capacity they have), and that this is most likely to show at peak evening times. thinkbroadband says some providers work to keep peak-time speeds not much slower than off-peak, while others do not, so the evening experience can differ a lot between providers, even on the same kind of line.
Sharing also keeps prices down: thinkbroadband says business broadband costs a lot more because you buy a dedicated amount of access, and ISPreview notes that an uncontended business leased line (a private connection not shared with others) is often significantly more expensive.
Your home network gets busier in the evening too
Before blaming your provider, look at what is happening inside your home at 8pm.
- More devices sharing the Wi-Fi. Virgin Media's help pages point out that Wi-Fi speed is shared between all connected devices, and the more devices connected to the hub, the more it can slow down.
- Hidden background traffic. ISPreview notes that background updates, some of them very large, and other people on the network add load you may not see. thinkbroadband adds that security updates and anti-virus scans can slow a computer down for a while.
- Distance and obstacles. ISPreview says Wi-Fi weakens quickly with distance and obstacles, and works best within a few feet of the router in the same room.
- Interference and placement. Virgin Media advises keeping the hub upright, in the open, away from radiators and at least one metre from electronics such as baby monitors, cordless phones and TVs that can interfere with Wi-Fi. The Wi-Fi Alliance notes that the 5GHz band is generally less crowded than 2.4GHz.
- Older kit. thinkbroadband says an older router may not support the fastest Wi-Fi, one slow Wi-Fi device can slow the whole network, and a computer with a 100Mbps Ethernet port cannot get the benefit of a faster connection, however good the line.
- A work VPN. A virtual private network for work routes your traffic through your employer's systems. Virgin Media says this can affect speed and that disconnecting and reconnecting can help.
Streaming apps hide some of this: BBC iPlayer, for example, lowers picture quality automatically when the connection is slow or shared, so a blurrier picture at 9pm may be your TV coping with less bandwidth.
For a full walk-through of the home side, see our guide to improving your Wi-Fi signal at home.
How to tell whether it is the network or your Wi-Fi
Work through these steps over a couple of days and note each result with the date and time. If you complain later, the notes are your evidence.
- Run a wired test and a Wi-Fi test at the same time in the evening. Plug a laptop or computer into the router with an Ethernet cable and run a test, then run one over Wi-Fi straight afterwards. Ofcom advises testing on a computer connected by Ethernet because Wi-Fi can slow the signal. You can use our broadband speed test; that page explains how to get a clean reading.
- Repeat the wired test early in the morning. thinkbroadband suggests testing at breakfast time, when networks are quiet, and comparing that with the evening. If your wired result is fine in the morning but drops noticeably every evening, the provider's network is the likelier cause. If wired results stay steady but Wi-Fi results fall in the evening, your home network is the likelier cause.
- Try a second device. Virgin Media and thinkbroadband both say that if only one device struggles, the problem may be that device.
- Quieten the house for the test. Ask everyone to pause streaming and downloads for a few minutes, and check nothing is updating. thinkbroadband recommends testing with nothing else using the connection. If speeds jump back up, the evening dip was mostly your own household's usage.
- Watch latency, not just speed. Latency (often called ping) is the time data takes to make a round trip, measured in milliseconds. Congestion can show up as rising latency as well as lower download speeds (see the quality monitor below). Our guide to latency, ping and jitter explains the terms.
A web speed test measures the whole path from your device, including your Wi-Fi, so one test proves little. A pattern over several evenings and mornings, with the wired and Wi-Fi results side by side, is far more convincing.
Track your connection over time with a quality monitor
thinkbroadband's Broadband Quality Monitor (BQM) is a tool for registered users: you register your connection's public IP address, it pings your router once a second and it graphs latency over each day, so you can see what happens every evening without sitting at your computer.
- What congestion looks like: thinkbroadband describes a "classic" peak-time graph where latency climbs in the evening and falls back late at night. In one of its examples the minimum latency rose from about 40ms to over 140ms at the busiest point. A consistent rise like that suggests a saturated larger link at an exchange or aggregation point, not a fault on one person's line.
- A false alarm to rule out: a very busy home connection, especially one where uploads (for example cloud photo backups) are using all the upload capacity, also pushes up latency and can cause some packet loss.
- Limits: your router must answer pings on its internet-facing (WAN) side, and not all routers do. thinkbroadband lists the BT Home Hub and Smart Hub, and Plusnet's Hub Zero and Hub One, as not supported, although it says a default or DMZ host set up behind them can answer the pings instead. If your provider uses CGNAT (sharing one public IP address between several customers), the monitor will not work over IPv4, though IPv6 may. Our CGNAT, static IP and IPv6 guide explains what that means. The pings use around 2.42MB of data a day.
Quick symptom checker
What you see | Likelier cause | What to try next |
|---|---|---|
Wired speed fine in the morning, much lower every evening | Congestion on the provider's network | Keep a log and contact your provider |
Wired speed steady, Wi-Fi drops in the evening | Busy or weak home Wi-Fi | Reduce devices, move the router, use 5GHz or cables |
Only one phone, laptop or TV is slow | That device | Test a second device; update or restart the slow one |
Speeds recover when the house goes quiet | Your own household's usage | Schedule updates and backups for overnight |
Latency climbs every evening on a quality monitor graph | A busy link further up the network | Share the graph with your provider |
Slow all day, not just in the evening | Probably not peak-time congestion | Check the line, wiring and router with your provider |
These are pointers, not diagnoses: several causes often combine.
What the rules say about peak-time speeds
Advertising. Since 23 May 2018, numerical download speed claims for headline packages in home broadband adverts have to be an "average" speed that at least 50% of customers get at peak time, 8pm to 10pm. Upload speed claims are judged case by case. Before that, a headline "up to" speed only had to be reachable by at least 10% of users.
Your personal estimate. Providers that have signed Ofcom's voluntary broadband speeds code must give you an estimated speed at busy times (8pm to 10pm for home broadband) and a minimum guaranteed speed before you sign up. thinkbroadband advises judging your speed against this personal estimate rather than the headline figure in the advert. Keep a copy of it.
The right to leave. Under the code, if your speed falls below the minimum guaranteed speed because of a problem on the provider's network, and the provider cannot fix it within 30 days, you can leave without an early exit fee. The right to leave also covers bundled services, such as a landline on the same line or pay-TV bought at the same time. Since 21 December 2022 it covers any product linked to the broadband financially, contractually or technically. If you are on a rolling monthly contract this process does not apply, but you can give notice (usually a month) to leave anyway. The signatories listed by Ofcom are BT, EE, NOW Broadband, Plusnet, Sky, TalkTalk, Utility Warehouse, Virgin Media and Zen Internet.
Providers' own promises. Some go further than the code (checked October 2026):
- BT has a Stay Fast Guarantee covering speed to the BT hub; if speed is not restored within 30 days you get a reward card, with up to four claims a year.
- Sky lets you leave broadband and Talk without early termination charges if download speed to the hub stays below the guaranteed minimum for three or more consecutive days and cannot be fixed.
- EE lets you leave without an exit charge if it cannot fix speeds below your plan's guarantee.
These protections are about speed to the router and the provider's network, not slow Wi-Fi in a back bedroom, which is another reason to test wired. Our guide to broadband speed promises and minimum guarantees covers the code in full.
What official data says about evening speeds
Until 2023 Ofcom published regular home broadband performance reports, measured at the router (SamKnows test routers and providers' own routers with built-in test software), which removes the effect of home Wi-Fi and other devices on the network. The 2023 report, based on March 2023 data and reported by ISPreview, found average download speeds in the 8pm to 10pm peak of 70.3Mbps in urban areas and 56Mbps in rural areas, up from 62.1Mbps and 39.4Mbps a year earlier. That was the last such report Ofcom planned to publish.
Ofcom's most recent time-of-day figures are in its Connected Nations 2024 report, published in December 2024. They use March 2024 test data from four large providers, measured from the router to the internet, and show average 8pm to 10pm download speeds as a share of the 24-hour average:
Connection type | Peak (8pm to 10pm) speed as % of 24-hour average |
|---|---|
ADSL (older copper broadband) | 98.7% |
Fibre to the cabinet (FTTC) | 99.3% |
Cable (hybrid fibre coaxial) | 99.7% |
Full fibre (FTTP) | 99.4% |
Ofcom said download speeds reduce slightly at peak times, reflecting congestion within the network or across the internet, with the biggest dip on ADSL. It also warned that peak-time performance for an individual consumer may differ from these averages, that other providers may vary, and that the figures are not directly comparable with the older reports. In its Connected Nations 2025 report, Ofcom said it no longer reports time-of-day performance because its 2024 data showed a low level of variation across the day.
That does not mean your slowdown is not real. National averages can hide local hotspots, and these measurements stop at the router, so they leave out the Wi-Fi, in-home wiring and household congestion that Ofcom itself says affect what you experience on your devices. A study by comparison site Broadband Genie, reported by ISPreview in May 2026, looked at 144,509 web speed tests over 12 months and found the biggest average peak-time drop in Wigan, at 55%. It used a wider 7pm to 11pm peak, and ISPreview said the figures should be taken with a pinch of salt because web tests also capture home-network problems and busy test servers.
What to do about slow evening broadband
Fix what you control first, then take the evidence to your provider, then think about switching.
1. Sort out your home network
- Plug in the devices that matter most in the evening, such as the TV, games console and work computer. Virgin Media's advice is to connect consoles, laptops and desktops by Ethernet, and notes that your package speed is the most you should expect on a wired connection. Our guide to wiring your home network with Ethernet has options if cables are awkward.
- Move the router somewhere central and open, and use 5GHz for nearby streaming and gaming devices.
- Set big updates and cloud backups to run overnight.
- If signal is weak in parts of the house, Openreach notes a Wi-Fi booster may help; our comparison of mesh Wi-Fi and Wi-Fi extenders explains the choices.
- For phone-line broadband, Ofcom suggests plugging the router into the main phone socket.
2. Take your evidence to your provider
If wired tests show a regular evening drop, contact your broadband provider, not Openreach. Openreach says it cannot take reports of slow speeds directly; your provider manages your connection and can confirm whether slower evening speeds are expected for your connection, and whether upgrading your package or switching to full fibre could help. Some, such as Virgin Media, have a postcode service-status checker for known local problems.
When you get in touch, have ready:
- your wired morning and evening results, with dates and times, and the Wi-Fi results for comparison;
- a screenshot or link to your quality monitor graph, if you set one up;
- your estimated peak-time speed and minimum guaranteed speed from when you signed up;
- what you have already ruled out (other devices, VPN, updates, router position).
Ask directly whether there is congestion in your area and when a capacity upgrade is planned. ISPreview notes that complaints usually lead to oversubscription being resolved, though it can take time. If you are below your minimum guaranteed speed, ask the provider to confirm in writing that the 30-day fix period has started. If things stall, our guide on how to complain about your broadband provider sets out the next steps.
3. Consider a different provider or connection
If the provider cannot fix it within 30 days and it signed the speeds code, you may be able to leave without paying an exit fee; see leaving broadband without an exit fee for how that works. If you are out of contract, you can move anyway.
Because providers differ in how much capacity they buy, a different provider can give a better evening experience on the same type of connection; ISPreview says changing provider may help with oversubscription. Nothing guarantees a particular result, so judge any new deal on its peak-time estimate and minimum guaranteed speed.
To see what is available at your address, enter your postcode in the comparison on our broadband deals page, or go straight to fibre broadband deals if you want to see full fibre options. Our guide to UK broadband providers has background on each. The comparison is run by our partner and shows live deals; it cannot tell you how a provider performs at peak time in your street, so check the speed estimate you are given before ordering.
Evening broadband speed FAQs
Is it normal for broadband to slow down in the evening?
Some slowing is normal. Openreach says dips during busy evening periods are common on shared broadband networks, because many customers share capacity. A small, occasional dip is expected; a large drop every evening, or speeds below your minimum guaranteed speed, is worth raising with your provider.
How do I know if slow evening speeds are my Wi-Fi or my provider?
Run a speed test on a computer plugged into the router by cable, both early in the morning and in the evening, and compare it with Wi-Fi tests at the same times. If the wired result drops in the evening, the network is the likelier cause. If only the Wi-Fi results drop, look at your home network first.
Can I leave my contract if my broadband is slow at peak times?
Possibly. If your provider has signed Ofcom's speeds code and your speed falls below the minimum guaranteed speed because of a problem on its network, it has 30 days to fix it. If it cannot, you can leave without an early exit fee, along with linked bundled services. Being below the estimated peak speed alone does not trigger this right. On a rolling monthly contract you can simply give notice, usually a month.
Does full fibre slow down in the evening?
It can, because full fibre is still a shared service. Ofcom's last time-of-day figures (Connected Nations 2024, March 2024 data from four large providers, measured from router to internet) found average 8pm to 10pm download speeds were 99.4% of the 24-hour average on full fibre, compared with 99.3% on FTTC, 99.7% on cable and 98.7% on ADSL. Ofcom notes that individual homes can differ from these averages, and they leave out home Wi-Fi.
What is a contention ratio?
It describes how many customers may share the same piece of network capacity, so a lower ratio means fewer households competing for it. The legal specification for the broadband Universal Service Obligation, the right to request a decent connection, sets a contention ratio no higher than 50:1 alongside a 10Mbps download and 1Mbps upload.
Should I report slow evening speeds to Openreach or my provider?
Always your provider. Openreach says it cannot take reports of slow speeds directly, even if it runs the network your connection uses. Your provider manages your connection, can confirm whether slower evening speeds are expected for your connection and is the company bound by any speed guarantee in your contract.



